⚡ Behind the Beam: How We Laser the Gravity Utility Knife

🎥 Watch the Process in Action
See exactly how we custom laser every blade and bead in our shop.

When you hear “gravity utility knife,” you probably think of a tough tool that can handle anything you throw at it. You’re right—but what you don’t see is the precision laser process that transforms each blade and bead from raw titanium into something you’ll be proud to carry.

Most companies stop at “functional.” At Gear Infusion, we go further. We engineer, laser, and finish every piece ourselves—because when you carry a gravity utility knife every day, details matter.

❌ The Problem with “Custom” from Other Shops

Walk through Amazon or a big-box store and you’ll see the word custom slapped on everything. But here’s what that usually means:

• Crooked, half-burned logos.

• Artwork that doesn’t line up.

• Cheap outsourced etching that wears off after a week.

That’s not “custom.” That’s disposable.

✅ Our Laser Process: Engineered for the Gravity Utility Knife

Every knife and lanyard we customize goes through the same exact process:

• 100W Fiber Laser with Rotary Attachment → delivers consistent, high-powered etching.

• 3D-Printed Fixtures → designed in-house so every blade is locked into place at the right angle—no constant recalibration.

• Titanium Arbors → grade 5 titanium holds the bead or blade so tight it clicks into place, ensuring perfect alignment.

• Full-Wrap Artwork → topographic maps, fractals, circuits—our laser rotates step by step until the design meets seamlessly around the blade or bead.

Each run takes about five minutes of dedicated laser time—because rushing would mean sacrificing precision.

🔬 Why This Matters for Your Knife

When you grab your gravity utility knife, you’ll notice:

• Crisp laser lines that won’t fade or chip.

• Artwork that aligns perfectly around the blade.

• Durability engineered in, not bolted on later.

It’s the difference between gear that feels like yours… and gear that feels like it belongs in the discount bin.

⚒️ From Laser to Your Pocket

Once the bead or blade comes out of the laser, we finish it, match it with your lanyard or Ghost-Ti, and pack it up ourselves. No middlemen. No resellers. Just our shop making sure it’s done right.

That’s why every piece we send out is one I’d carry in my own pocket.

👉 Ready to Upgrade?

If you’re serious about your everyday carry, don’t settle for “custom” that fades.
Get a custom-lasered gravity utility knife blade today and see the difference for yourself.

[Customize Yours Now →]

❓ FAQs: Gravity Utility Knife & Custom Lasering

What is a gravity utility knife?
A gravity utility knife is a precision cutting tool where the blade deploys using a gravity mechanism. Ours are enhanced with custom laser etching for durability and personalization.

Can I get my gravity utility knife custom lasered?
Yes. We laser titanium utility blades and lanyard beads in-house using a 100W fiber laser.

How long does the process take?
Each bead or blade takes about five minutes of dedicated laser time, plus finishing.

Will the laser engraving wear off?
No. Because it’s etched into grade 5 titanium, it won’t rub off like surface printing or paint.

Where can I order one?
Right here at Gear Infusion. You can order a custom-lasered gravity utility knife blade directly from our configurator.